Information on GB3UB the Bath 70cm repeater and MB7UB the APRS Digipeater.
A liitle about the repeater
Both repeaters are located HERE, on the roof of Bath University overlooking the historic city of Bath
GB3UB is the 70cm 433mhz voice repeater and operates on 433.100/434.700mhz, ctcss 118.8hz. It uses a converted Storno base station using G8CUL logic running 10w to two Jaybeam folded dipoles. It provides hand-held coverage around the city of Bath, out towards Chippenham, down towards Midsomer Norton and across towards Westbury. It is internet linked via Echolink (node no. 201135 )
MB7UB is the APRS data digipeater.
You can find out what I do in my day job HERE.
For further information you can email me
GB3UB is the 70cm 433mhz voice repeater and operates on 433.100/434.700mhz, ctcss 118.8hz. It uses a converted Storno base station using G8CUL logic running 10w to two Jaybeam folded dipoles. It provides hand-held coverage around the city of Bath, out towards Chippenham, down towards Midsomer Norton and across towards Westbury. It is internet linked via Echolink (node no. 201135 )
MB7UB is the APRS data digipeater.
You can find out what I do in my day job HERE.
For further information you can email me
26 January 2009
MB7UB back on air
Thanks to a very generous off from M3ZBE. MB7UB is back on and working well. This now gives me some time to get the original repaired. Thanks again Neil for the loan.
19 January 2009
MB7UB Off Air
had a trip yesterday to tweak the settings and restore the TRACE path. However during the visit the rig died. I now have two dead TM-D700 at home. I am trying to find a cheap repair and possibly a source of replacement gear.
06 January 2009
MB7UB APRS settings
Made a visit to MB7UB and made the changes. You will need to change YOUR settings. The information you will need is at
http://www.apritch.myby.co.uk/uiview_newn-n.htm
http://www.apritch.myby.co.uk/uiview_newn-n.htm
Subscribe to:
Posts (Atom)