A liitle about the repeater

Both repeaters are located HERE, on the roof of Bath University overlooking the historic city of Bath

GB3UB is the 70cm 433mhz voice repeater and operates on 433.100/434.700mhz, ctcss 118.8hz. It uses a converted Storno base station using G8CUL logic running 10w to two Jaybeam folded dipoles. It provides hand-held coverage around the city of Bath, out towards Chippenham, down towards Midsomer Norton and across towards Westbury. It is internet linked via Echolink (node no. 201135 )
MB7UB is the APRS data digipeater.

You can find out what I do in my day job HERE.

For further information you can email me

14 July 2015

GB3UB & MB7UB update

OK, made a site visit this evening to fix the problem with GB3UB, which was stuck open with a tone. Turns out it was a simple reset and the repeater is running fine, if a little hot. As a result of this visit I have reinstated MB7UB, the APRS digipeater which is now running fine. I still hope to get it running standalone with the Tiny 2 at some stage.
No comments:
Labels: ,

01 July 2015

MB7UB

MB7UB is currently sat on the desk in the shack waiting to be installed. Still not the configuration I want but it will do for the time being. I hope to install it next Thursday.
No comments:
Subscribe to: Posts (Atom)