Information on GB3UB the Bath 70cm repeater and MB7UB the APRS Digipeater.
A liitle about the repeater
Both repeaters are located HERE, on the roof of Bath University overlooking the historic city of Bath
GB3UB is the 70cm 433mhz voice repeater and operates on 433.100/434.700mhz, ctcss 118.8hz. It uses a converted Storno base station using G8CUL logic running 10w to two Jaybeam folded dipoles. It provides hand-held coverage around the city of Bath, out towards Chippenham, down towards Midsomer Norton and across towards Westbury. It is internet linked via Echolink (node no. 201135 )
MB7UB is the APRS data digipeater.
You can find out what I do in my day job HERE.
For further information you can email me
GB3UB is the 70cm 433mhz voice repeater and operates on 433.100/434.700mhz, ctcss 118.8hz. It uses a converted Storno base station using G8CUL logic running 10w to two Jaybeam folded dipoles. It provides hand-held coverage around the city of Bath, out towards Chippenham, down towards Midsomer Norton and across towards Westbury. It is internet linked via Echolink (node no. 201135 )
MB7UB is the APRS data digipeater.
You can find out what I do in my day job HERE.
For further information you can email me
29 October 2015
All back
Had a site visit tonight with John and at long last GB3UB is ending the correct callsign and MB7UB is back and working. We also replaced the PSU which had failed. Hopefully they will continue to work without any further problems.
20 October 2015
MB7UB Update
Currently have MB7UB under test on the bench here in the shack. It consists of a APRS TNC Digi Tracker and an Icom IC2E with reduced deviation. This setup runs completely standalone and is the setup I have wanted for some time. I am waiting for a replaced 2.5mm plug and then it will be ready to install, hopefully sometime next week.
Subscribe to:
Posts (Atom)