Information on GB3UB the Bath 70cm repeater and MB7UB the APRS Digipeater.
A liitle about the repeater
Both repeaters are located HERE, on the roof of Bath University overlooking the historic city of Bath
GB3UB is the 70cm 433mhz voice repeater and operates on 433.100/434.700mhz, ctcss 118.8hz. It uses a converted Storno base station using G8CUL logic running 10w to two Jaybeam folded dipoles. It provides hand-held coverage around the city of Bath, out towards Chippenham, down towards Midsomer Norton and across towards Westbury. It is internet linked via Echolink (node no. 201135 )
MB7UB is the APRS data digipeater.
You can find out what I do in my day job HERE.
For further information you can email me
GB3UB is the 70cm 433mhz voice repeater and operates on 433.100/434.700mhz, ctcss 118.8hz. It uses a converted Storno base station using G8CUL logic running 10w to two Jaybeam folded dipoles. It provides hand-held coverage around the city of Bath, out towards Chippenham, down towards Midsomer Norton and across towards Westbury. It is internet linked via Echolink (node no. 201135 )
MB7UB is the APRS data digipeater.
You can find out what I do in my day job HERE.
For further information you can email me
01 April 2009
MB7UB Upgrade
MB7UB is in the process of being upgraded. Since the failure of the TM-D700 I have had the loan of another one. This has given me time to sort things out. I have at present on test, a Tiny2 and a IC-2E. This will at first be running a full UI-view digipeater. I hope in the near future to further upgrade this to run the UIDIGI prom. This wil take away the need to run with a PC. My thanks go to all of you who have offered help. I have not taken up all these offers but I thank you all.
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment