Information on GB3UB the Bath 70cm repeater and MB7UB the APRS Digipeater.
A liitle about the repeater
Both repeaters are located HERE, on the roof of Bath University overlooking the historic city of Bath
GB3UB is the 70cm 433mhz voice repeater and operates on 433.100/434.700mhz, ctcss 118.8hz. It uses a converted Storno base station using G8CUL logic running 10w to two Jaybeam folded dipoles. It provides hand-held coverage around the city of Bath, out towards Chippenham, down towards Midsomer Norton and across towards Westbury. It is internet linked via Echolink (node no. 201135 )
MB7UB is the APRS data digipeater.
You can find out what I do in my day job HERE.
For further information you can email me
GB3UB is the 70cm 433mhz voice repeater and operates on 433.100/434.700mhz, ctcss 118.8hz. It uses a converted Storno base station using G8CUL logic running 10w to two Jaybeam folded dipoles. It provides hand-held coverage around the city of Bath, out towards Chippenham, down towards Midsomer Norton and across towards Westbury. It is internet linked via Echolink (node no. 201135 )
MB7UB is the APRS data digipeater.
You can find out what I do in my day job HERE.
For further information you can email me
20 June 2015
Repeater Update
Just noticed I have not updated this. GB3UB is back working and seems better than ever. We only took the box out and then reconnected it so maybe there was a bad connection somewhere. MB7UB is a different matter. I have the equipment, but the TINY 2 TNC I have is version 2 and not version 5 which has all the digi software. I am trying to find a source of the firmware but not having much luck at present.
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment