Information on GB3UB the Bath 70cm repeater and MB7UUB the APRS Digipeater.
A liitle about the repeater
Both repeaters are located HERE, on the roof of Bath University overlooking the historic city of Bath
GB3UB is the 70cm 433mhz voice repeater and operates on 433.100/434.700mhz, ctcss 118.8hz. It uses a converted Storno base station using G8CUL logic running 10w to two Jaybeam folded dipoles. It provides hand-held coverage around the city of Bath, out towards Chippenham, down towards Midsomer Norton and across towards Westbury. It is internet linked via Echolink (node no. 201135 )
MB7UUB is the APRS data digipeater.
You can find out what I do in my day job HERE.
For further information you can email me
GB3UB is the 70cm 433mhz voice repeater and operates on 433.100/434.700mhz, ctcss 118.8hz. It uses a converted Storno base station using G8CUL logic running 10w to two Jaybeam folded dipoles. It provides hand-held coverage around the city of Bath, out towards Chippenham, down towards Midsomer Norton and across towards Westbury. It is internet linked via Echolink (node no. 201135 )
MB7UUB is the APRS data digipeater.
You can find out what I do in my day job HERE.
For further information you can email me
15 August 2018
Echolink Changes
You may have noticed the Echolink callsign has changed. This is due to the link now being located at my QTH. John G4OTJ has hosted this for many years and I would like to thank him for his work over these years. At present it is working on an indoor beam so the signal may not be as good as it could. I will hopefully be able to mount this outside. In the meantime please let me know of any problems you have.
21 June 2018
GB3UB, now OK
Following the problem with the repeater not retransmitting a visit was made today. We checked all the settings which were OK, but as a result of plugging a computer in it seems to have cured the problem. Hopefully this was just some form of problem with the logic CPU.
08 June 2018
Logic problem
It appears the logic at UB has became corrupted again. I did make a visit today and made a hard reset but to no avail. I will try and make a visit soon with a lap top and reload the logic. The repeater is still sending an ident.
Subscribe to:
Posts (Atom)